Mercury Revolution 4 Propellers
The Mercury Revolution 4 Propeller gets you on plane faster while delivering smooth throttle response, enhanced midrange thrust, and impressive top-end speed with minimal cavitation and vibration in rough-water conditions.
Filters
17 products
Revolution 4
4-Blade Stainless Steel Propeller
The Mercury Revolution 4 propeller is an incredible and versatile 4-blade propeller for a wide range of applications, known for a great hole-shot, staying hooked up without blowouts, and the ability to provide a low-speed plane off for slower tow sport activity.
- Hub kit is sold separately. Please see the fitment information provided to select the correct hub kit for your application.
- Enabled with 4-hole Performance Vent System (PVS) to allow optimal hole-shot customization.
Mercury Marine offers a 1-year limited warranty on all Mercury propellers. To determine warranty requirements for a specific item, please contact the manufacturer or contact us for assistance. Please note warranty processing may take 2-4 weeks and will be subject to Mercury Marine's policies and discretion. Mercury warranty does not cover defects determined to be caused by normal wear or due to customer negligence.
Call us at (920) 788-0220 during our standard business hours to talk to an expert. Or send us a message (average reply time 2h).
Description
Mercury Revolution 4 Propeller
The Mercury Revolution 4 propeller is an incredible and versatile 4-blade propeller for a wide range of applications, known for a great hole-shot, staying hooked up without blowouts, and the ability to provide a low-speed plane off for slower tow sport activity.
- Hub kit is sold separately. Please see the fitment information provided to select the correct hub kit for your application.
- Enabled with 4-hole Performance Vent System (PVS) to allow optimal hole-shot customization.
Mercury Revolution 4 Propeller
Stainless Steel
Mercury Flo-Torq Hub Kit (sold separately). Please see the fitment information below to determine which hub kit is needed for your application.
Through hub exhaust with Mercury's Performance Vent System (PVS).
- 14.6 x 15"
- 14.6 x 17"
- 14.6 x 18"
- 14.6 x 19"
- 14.6 x 20"
- 14.6 x 21"
- 14.6 x 23"
- 14.6 x 25"
The Mercury Revolution 4 has exceptional bite and it is very very smooth compared to 3-blade props. I went with the 21P and I don't get the blowout in the corners anymore. Thank you.
I tested the Mercury Revolution 4 on my twin Merc 250HP on my Mako boat. The performance was great! It really gave me the added stern lift I was looking for.
I have a Boston Whaler and I got the Mercury Revolution 4 propellers last week. They work great compared to the 3-blade propeller I had previously. It handles way better and the top speed is good too.
Lift, speed, and superior holding.
The Mercury Revolution 4 propeller is the ideal propeller for non-ideal conditions. While the Revolution 4 propeller is commonly used on off-shore center-console boats, the versatility of the 4-blade design makes it well suited for a variety of additional applications. Success with the Revolution 4 propeller has been found on applications from aluminum fishing boats to large center consoles with triple motors.
Plug-and-play performance.
The Revolution 4 propellers features Mercury’s patented Performance Vent System (PVS®), which uses interchangeable vent plugs in up to three holes to precisely control exhaust gas venting for an optimized hole shot. By swapping plugs in seconds—from fully closed to various vent sizes—boaters can dial in engine RPM for quicker planing under different loads and altitudes
Lift, speed, and superior holding.
The Mercury Revolution 4 propeller is the ideal propeller for non-ideal conditions. While the Revolution 4 propeller is commonly used on off-shore center-console boats, the versatility of the 4-blade design makes it well suited for a variety of additional applications. Success with the Revolution 4 propeller has been found on applications from aluminum fishing boats to large center consoles with triple motors.
Plug-and-play performance.
The Revolution 4 propellers features Mercury’s patented Performance Vent System (PVS®), which uses interchangeable vent plugs in up to three holes to precisely control exhaust gas venting for an optimized hole shot. By swapping plugs in seconds—from fully closed to various vent sizes—boaters can dial in engine RPM for quicker planing under different loads and altitudes
Mercury Revolution 4 Propeller Review
Mercury Revolution 4 Propeller
Easier. Faster. Smoother. More Efficient. The Mercury Revolution 4 propeller is the do-it-all stainless steel 4-blade propeller of the Mercury propeller lineup. The Revolution 4 propeller is best k...
Contact Us
Do you have any questions?
We are here to help! You can contact us either by our online form on this page or via phone, email, or chat.
Important Note: The more information you can provide us with, the more accurate/reliable any propeller suggestions we make will be.